Water column GeoFish and bottle pH data from Leg 1 (Seattle, WA to Hilo, HI) of the US GEOTRACES Pacific Meridional Transect (PMT) cruise (GP15, RR1814) on R/V Roger Revelle from September to October 2018 (NCEI Accession 0278544)
This dataset contains chemical data collected on R/V Roger Revelle during cruise RR1814 in the Gulf of Alaska and North Pacific Ocean from 2018-09-24 to 2018-10-21. These data include depth and pH. The instruments used to collect these data include GO-FLO Bottle, GeoFish Towed near-Surface Sampler, and Spectrophotometer. These data were collected by Gregory A. Cutter and Nicole R. Buckley of Old Dominion University as part of the "US GEOTRACES PMT: hydrogen sulfide as a strong ligand affecting trace metal cycling (PMT Hydrogen Sulfide)" and "US GEOTRACES Pacific Meridional Transect (U.S. GEOTRACES PMT)" projects and "U.S. GEOTRACES (U.S. GEOTRACES)" program. The Biological and Chemical Oceanography Data Management Office (BCO-DMO) submitted these data to NCEI on 2021-02-10.
The following is the text of the dataset description provided by BCO-DMO:
Water column fish and bottle pH data
Dataset Description:
Acquisition Description:
Methodology:
60 mL of unfiltered water was subsampled from 12L GO-Flo bottles on the GTC carousel for each pH measurement. They were analyzed at sea in primarily single analyses using an automated Ocean Optics UV-VIS spectrophotometric system that was modified from Carter et al. (2013) with pure m-cresol purple (mCP) indicator dye. They were usually analyzed within 3 hours of collection and the salinity and temperature dependent pH equation from Clayton and Byrne (1993) was applied.
Sampling and analytical procedures:
Sampling followed the GEOTRACES cookbook sampling method. 60 mL of unfiltered water was subsampled from 12L GO-Flo bottles, mounted on the GTC carousel. The 60 mL polypropylene syringes were fitted with polycarbonate 3-way valves to remove air bubbles and prevent exchange of CO2 prior to analysis and rinsed 3 times with unfiltered water. The sample syringes were then kept at room temperature in the dark until placed in a circulating water bath at 25°C for a minimum of 20 minutes to bring the samples close to analysis temperature.
Once at analysis temperature, each syringe was attached to one of the ports on the automated syringe pump that delivered sample and dye to a 10 cm cell with an inner volume of 10 mL for sample seawater. The cell is placed in a thermostated-holder that is temperature controlled by water continuously pumped from a circulating water temperature bath, so the sample remains at 25±0.1°C during analysis. The samples were analyzed at sea within 3 hours of collection and the automated measurement sequence was initiated in LabVIEW and required a total processing time of 5 minutes.
Instruments:
The temperature of the absorbance cell is controlled using deionized water pumped from a VWR circulating water bath (Cat. No. 89202-966) and through the water-jacketed CUV-10 cuvette holder with a 10 cm pathlength, 10 mL volume cuvette with quartz windows. QP400-1-UV-VIS premium fiber optic cables are used from the HL-2000-FHSA light source to the CUV UV 10 cm cuvette holder and then to the Optics STS-VIS-L-25-400-SMA miniature spectrophotometer. The automation and data processing are controlled from a computer program written in LabVIEW. A Norgren Kloehn Versa Pump 6 syringe pump with a 4-way valve and 48000 step resolution was controlled by the LabVIEW program that delivers the sample, then dye to the cuvette.
The following is the text of the dataset description provided by BCO-DMO:
Water column fish and bottle pH data
Dataset Description:
Acquisition Description:
Methodology:
60 mL of unfiltered water was subsampled from 12L GO-Flo bottles on the GTC carousel for each pH measurement. They were analyzed at sea in primarily single analyses using an automated Ocean Optics UV-VIS spectrophotometric system that was modified from Carter et al. (2013) with pure m-cresol purple (mCP) indicator dye. They were usually analyzed within 3 hours of collection and the salinity and temperature dependent pH equation from Clayton and Byrne (1993) was applied.
Sampling and analytical procedures:
Sampling followed the GEOTRACES cookbook sampling method. 60 mL of unfiltered water was subsampled from 12L GO-Flo bottles, mounted on the GTC carousel. The 60 mL polypropylene syringes were fitted with polycarbonate 3-way valves to remove air bubbles and prevent exchange of CO2 prior to analysis and rinsed 3 times with unfiltered water. The sample syringes were then kept at room temperature in the dark until placed in a circulating water bath at 25°C for a minimum of 20 minutes to bring the samples close to analysis temperature.
Once at analysis temperature, each syringe was attached to one of the ports on the automated syringe pump that delivered sample and dye to a 10 cm cell with an inner volume of 10 mL for sample seawater. The cell is placed in a thermostated-holder that is temperature controlled by water continuously pumped from a circulating water temperature bath, so the sample remains at 25±0.1°C during analysis. The samples were analyzed at sea within 3 hours of collection and the automated measurement sequence was initiated in LabVIEW and required a total processing time of 5 minutes.
Instruments:
The temperature of the absorbance cell is controlled using deionized water pumped from a VWR circulating water bath (Cat. No. 89202-966) and through the water-jacketed CUV-10 cuvette holder with a 10 cm pathlength, 10 mL volume cuvette with quartz windows. QP400-1-UV-VIS premium fiber optic cables are used from the HL-2000-FHSA light source to the CUV UV 10 cm cuvette holder and then to the Optics STS-VIS-L-25-400-SMA miniature spectrophotometer. The automation and data processing are controlled from a computer program written in LabVIEW. A Norgren Kloehn Versa Pump 6 syringe pump with a 4-way valve and 48000 step resolution was controlled by the LabVIEW program that delivers the sample, then dye to the cuvette.
Dataset Citation
- Cite as: Cutter, Gregory A.; Buckley, Nicole R. (2023). Water column GeoFish and bottle pH data from Leg 1 (Seattle, WA to Hilo, HI) of the US GEOTRACES Pacific Meridional Transect (PMT) cruise (GP15, RR1814) on R/V Roger Revelle from September to October 2018 (NCEI Accession 0278544). [indicate subset used]. NOAA National Centers for Environmental Information. Dataset. https://www.ncei.noaa.gov/archive/accession/0278544. Accessed [date].
Dataset Identifiers
ISO 19115-2 Metadata
gov.noaa.nodc:0278544
Download Data |
|
Distribution Formats |
|
Ordering Instructions | Contact NCEI for other distribution options and instructions. |
Distributor |
NOAA National Centers for Environmental Information +1-301-713-3277 NCEI.Info@noaa.gov |
Dataset Point of Contact |
NOAA National Centers for Environmental Information ncei.info@noaa.gov |
Time Period | 2018-09-24 to 2018-10-21 |
Spatial Bounding Box Coordinates |
West: -155.72
East: -152
South: 19.68
North: 55.72
|
Spatial Coverage Map |
General Documentation |
|
Associated Resources |
|
Publication Dates |
|
Data Presentation Form | Digital table - digital representation of facts or figures systematically displayed, especially in columns |
Dataset Progress Status | Complete - production of the data has been completed Historical archive - data has been stored in an offline storage facility |
Data Update Frequency | As needed |
Purpose | This dataset is available to the public for a wide variety of uses including scientific research and analysis. |
Use Limitations |
|
Dataset Citation |
|
Cited Authors | |
Principal Investigators | |
Contributors | |
Resource Providers | |
Points of Contact | |
Publishers | |
Acknowledgments |
Theme keywords |
NODC DATA TYPES THESAURUS
NODC OBSERVATION TYPES THESAURUS
WMO_CategoryCode
|
Data Center keywords | NODC COLLECTING INSTITUTION NAMES THESAURUS NODC SUBMITTING INSTITUTION NAMES THESAURUS Global Change Master Directory (GCMD) Data Center Keywords |
Platform keywords | NODC PLATFORM NAMES THESAURUS BCO-DMO Platform Names Global Change Master Directory (GCMD) Platform Keywords ICES/SeaDataNet Ship Codes |
Instrument keywords | NODC INSTRUMENT TYPES THESAURUS BCO-DMO Standard Instruments Global Change Master Directory (GCMD) Instrument Keywords Originator Instrument Names |
Place keywords |
NODC SEA AREA NAMES THESAURUS
Global Change Master Directory (GCMD) Location Keywords
|
Project keywords |
NODC PROJECT NAMES THESAURUS
BCO-DMO Standard Programs
BCO-DMO Standard Projects
|
Keywords | NCEI ACCESSION NUMBER |
Use Constraints |
|
Data License | |
Access Constraints |
|
Fees |
|
Lineage information for: dataset | |
---|---|
Processing Steps |
|
Output Datasets |
|
Acquisition Information (collection) | |
---|---|
Instrument |
|
Platform |
|
Last Modified: 2024-05-31T15:15:28Z
For questions about the information on this page, please email: ncei.info@noaa.gov
For questions about the information on this page, please email: ncei.info@noaa.gov