Porewater sulfate, sulfide, ammonia, phosphate, and silicate concentrations in Alvin pushcore samples from Guaymas Basin hydrothermal sediments collected on R/V Atlantis cruise AT37-06 in December 2016 (NCEI Accession 0278298)
This dataset contains chemical data collected on Alvin and R/V Atlantis during cruise AT37-06 and deployment AT37-06_Alvin_Dives in the Gulf of California from 2016-12-09 to 2016-12-27. These data include Nitrate, Nitrite, SiOH_4, depth, and nitrate plus nitrite. The instruments used to collect these data include Continuous Flow Analyzer, Ion Chromatograph, Push Corer, and Sediment Porewater Sampler. These data were collected by Samantha B. Joye of University of Georgia and Andreas Teske of University of North Carolina at Chapel Hill as part of the "Collaborative Research: Microbial Carbon cycling and its interactions with Sulfur and Nitrogen transformations in Guaymas Basin hydrothermal sediments (Guaymas Basin Interactions)" project. The Biological and Chemical Oceanography Data Management Office (BCO-DMO) submitted these data to NCEI on 2021-03-12.
The following is the text of the dataset description provided by BCO-DMO:
Guaymas porewater nutrients
Dataset Description:
Acquisition Description:
Methodology: Porewater sulfide concentrations were determined photometrically, and sulfate concentrations were determined by ion chromatography.
Sampling and Analytical Procedures: This porewater sulfate and sulfide dataset consists of results obtained at the Max-Planck-Institute for Marine Microbiology in Bremen, Germany. The experimental procedures are listed here separately by institution. The sampling site names in the data table are based on Teske et al. 2016 and Teske et al. 2021.
For analyses at the Max-Planck Institute for Marine Microbiology (Gunter Wegener), intact sediment cores were sampled using the Rhizons (Rhizosphere Research Products, Wageningen, NL) as described previously (Seeberg-Elversfeldt et al., 2005). The overlying water was removed from the cores and holes were drilled into designated sediment sampling depths. Pretreated Rhizons were injected and suction was applied with syringes for approx. 30 min. The rhizome depths are given in the sample tables. For sulfide analysis, 1 ml porewater subsamples were fixed with 0.1 ml of 0.1 M zinc acetate solution to preserve the sulfide as zinc sulfide until analysis by the methylene blue method (Cline 1969). The same fixed porewater sample was used for measuring sulfate concentrations using ion chromatography (Metrohm 930 Compact IC flex oven, Metrosep A PCC HC/4.0 preconcentration column, and Metrosep A Supp 5 Guard/4.0 chromatography column). The concentrations of ammonia, phosphate, and silicate were determined from porewater using a continuous flow nutrient analyzer (QuAAtro39; Seal Analytical) as published previously (Grasshoff et al., 2009).
Known Problems/Issues : Problems with Mexican customs and the agent used by WHOI at the time have resulted in limited availability of sampling gear and sampling vials on the ship. Transport problems during the return trip have caused sample losses among the porewater samples, which are evident in occasional gaps in porewater profiles or short profiles.
Note that the Alvin frame grabber was not turned on during dive 4862; therefore positions and depth are approximations.
The following is the text of the dataset description provided by BCO-DMO:
Guaymas porewater nutrients
Dataset Description:
Acquisition Description:
Methodology: Porewater sulfide concentrations were determined photometrically, and sulfate concentrations were determined by ion chromatography.
Sampling and Analytical Procedures: This porewater sulfate and sulfide dataset consists of results obtained at the Max-Planck-Institute for Marine Microbiology in Bremen, Germany. The experimental procedures are listed here separately by institution. The sampling site names in the data table are based on Teske et al. 2016 and Teske et al. 2021.
For analyses at the Max-Planck Institute for Marine Microbiology (Gunter Wegener), intact sediment cores were sampled using the Rhizons (Rhizosphere Research Products, Wageningen, NL) as described previously (Seeberg-Elversfeldt et al., 2005). The overlying water was removed from the cores and holes were drilled into designated sediment sampling depths. Pretreated Rhizons were injected and suction was applied with syringes for approx. 30 min. The rhizome depths are given in the sample tables. For sulfide analysis, 1 ml porewater subsamples were fixed with 0.1 ml of 0.1 M zinc acetate solution to preserve the sulfide as zinc sulfide until analysis by the methylene blue method (Cline 1969). The same fixed porewater sample was used for measuring sulfate concentrations using ion chromatography (Metrohm 930 Compact IC flex oven, Metrosep A PCC HC/4.0 preconcentration column, and Metrosep A Supp 5 Guard/4.0 chromatography column). The concentrations of ammonia, phosphate, and silicate were determined from porewater using a continuous flow nutrient analyzer (QuAAtro39; Seal Analytical) as published previously (Grasshoff et al., 2009).
Known Problems/Issues : Problems with Mexican customs and the agent used by WHOI at the time have resulted in limited availability of sampling gear and sampling vials on the ship. Transport problems during the return trip have caused sample losses among the porewater samples, which are evident in occasional gaps in porewater profiles or short profiles.
Note that the Alvin frame grabber was not turned on during dive 4862; therefore positions and depth are approximations.
Dataset Citation
- Cite as: Teske, Andreas; Joye, Samantha B. (2023). Porewater sulfate, sulfide, ammonia, phosphate, and silicate concentrations in Alvin pushcore samples from Guaymas Basin hydrothermal sediments collected on R/V Atlantis cruise AT37-06 in December 2016 (NCEI Accession 0278298). [indicate subset used]. NOAA National Centers for Environmental Information. Dataset. https://www.ncei.noaa.gov/archive/accession/0278298. Accessed [date].
Dataset Identifiers
ISO 19115-2 Metadata
gov.noaa.nodc:0278298
Download Data |
|
Distribution Formats |
|
Ordering Instructions | Contact NCEI for other distribution options and instructions. |
Distributor |
NOAA National Centers for Environmental Information +1-301-713-3277 NCEI.Info@noaa.gov |
Dataset Point of Contact |
NOAA National Centers for Environmental Information ncei.info@noaa.gov |
Time Period | 2016-12-09 to 2016-12-27 |
Spatial Bounding Box Coordinates |
West: -111.473
East: -111.384
South: 27.007
North: 27.471
|
Spatial Coverage Map |
General Documentation |
|
Associated Resources |
|
Publication Dates |
|
Data Presentation Form | Digital table - digital representation of facts or figures systematically displayed, especially in columns |
Dataset Progress Status | Complete - production of the data has been completed Historical archive - data has been stored in an offline storage facility |
Data Update Frequency | As needed |
Purpose | This dataset is available to the public for a wide variety of uses including scientific research and analysis. |
Use Limitations |
|
Dataset Citation |
|
Cited Authors | |
Principal Investigators | |
Contributors | |
Resource Providers | |
Points of Contact | |
Publishers | |
Acknowledgments |
|
Theme keywords |
NODC DATA TYPES THESAURUS
NODC OBSERVATION TYPES THESAURUS
WMO_CategoryCode
|
Data Center keywords | NODC COLLECTING INSTITUTION NAMES THESAURUS NODC SUBMITTING INSTITUTION NAMES THESAURUS Global Change Master Directory (GCMD) Data Center Keywords |
Platform keywords | NODC PLATFORM NAMES THESAURUS BCO-DMO Platform Names Global Change Master Directory (GCMD) Platform Keywords ICES/SeaDataNet Ship Codes |
Instrument keywords | NODC INSTRUMENT TYPES THESAURUS BCO-DMO Standard Instruments Global Change Master Directory (GCMD) Instrument Keywords Originator Instrument Names |
Place keywords | NODC SEA AREA NAMES THESAURUS Global Change Master Directory (GCMD) Location Keywords Provider Place Names |
Project keywords | BCO-DMO Standard Projects Provider Cruise IDs Provider Deployment IDs Provider Funding Award Information |
Keywords | NCEI ACCESSION NUMBER |
Use Constraints |
|
Data License | |
Access Constraints |
|
Fees |
|
Lineage information for: dataset | |
---|---|
Processing Steps |
|
Output Datasets |
|
Acquisition Information (collection) | |
---|---|
Instrument |
|
Platform |
|
Last Modified: 2024-05-31T18:50:46Z
For questions about the information on this page, please email: ncei.info@noaa.gov
For questions about the information on this page, please email: ncei.info@noaa.gov