The Ocean Archive System searches our original datasets as they were submitted to us, not individual points or profiles. If you want to search and retrieve ocean profiles in a common format, or objectively analyzed fields, your better option may be to use one of our project applications. See: Access Data

OAS accession Detail for 9000117, meta_version: 12. Current meta_version is: 12
<< previous |revision: 12
accessions_id: 9000117 | archive
Title: Physical, chemical, and other data from bottle, CTD, and XBT casts from the SHOYO and other platforms from the North Pacific Ocean by the Japanese Hydrographic Office from 1975-12-17 to 1989-05-24 (NCEI Accession 9000117)
Abstract: Physical, chemical, and other data from bottle, CTD, and XBT casts from the SHOYO and other platforms from North Pacific Ocean. Data were collected by the Japanese Hydrographic Office from 17 December 1975 to 24 May 1989. Additional funding for digitizing historic data were provided by the Global Ocean Data Archaeology and Rescue (GODAR) project. Data were processed by NODC to the NODC standard Station Data II Output Format (SD2) and the Universal Bathythermograph Output Format (UBT).

The SD2 file format is used for physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5%), were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information, position, date and time are reported for each station. Each station contains the measurements taken at observed depth levels, but also includes data values interpolated to a set of standard depth levels.

The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. The XBT data files contain temperature values at originators defined depths. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permit measurements to be obtained to 1830 m.

Data has been processed by NODC to the NODC standard Bathythermograph XBT Selected Depths (SBT) (C125) and Ocean Station (C100) formats.

The Oceanographic Station Data (C100) format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels.

The UBT (C125) format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. Depths are selected by the originator - usually at standard horizons or some fixed interval. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permitted measurements to be obtained to 1830 m.
Date received: 19900524
Start date: 19751217
End date: 19890524
Seanames:
West boundary: 122
East boundary: 178.72
North boundary: 45.58
South boundary: -4.02
Observation types:
Instrument types:
Datatypes:
Submitter: Mori, Dr. Takumi
Submitting institution: Japanese Hydrographic Office
Collecting institutions:
Contributing projects:
Platforms:
Number of observations:
Supplementary information: Note: Metadata for this accession were extracted from a legacy database maintained by the U.S. National Oceanographic Data Center (NODC). The design of the database did not exactly reflect the FGDC Content Standard for Digital Geospatial Metadata (CSDGM).

Principal Investigator (PI) and organization contact information accurately represents all available information from the legacy database at the time that this description was created. However, proper attribution of a PI to a specific institution or the role (submitting or collecting) taken by an institution may not be correct due to inexact mapping between fields in the legacy database and the CSDGM. Due to this uncertainty, the contact information was initially recorded in the Supplemental Information element of the CSDGM description.

To develop more accurate metadata, NCEI reviews metadata for all accessions on an ongoing basis.

Points of contact for this data set include:
Contact info:
Agency: JAPANESE HYDROGRAPHIC OFFICE
PI: Mori, Dr. Takumi
Address:
address: 5-3-1 TSUKUJI, CHUO-KU
city: TOKYO
state: NOT AVAILABLE
postal: 104
country: JAPAN

In this accession, NCEI has archived multiple versions of these data. The latest (and best) version of these data has the largest version number.
Availability date: 19900524
Metadata version: 12
Keydate: 2002-11-19 19:40:22+00
Editdate: 2023-02-14 08:46:17+00