The Ocean Archive System searches our original datasets as they were submitted to us, not individual points or profiles. If you want to search and retrieve ocean profiles in a common format, or objectively analyzed fields, your better option may be to use one of our project applications. See: Access Data
OAS accession Detail for 0288326, meta_version: 1. Current meta_version is: 2
<< previous | |revision: 1| | next >> |
accessions_id: | 0288326 | archive |
---|---|
Title: | Temperature profiles of hydrothermal sediments measured by HOV Alvin’s heat flow probe in Guaymas Basin hydrothermal vents, RV/Atlantis cruise AT42-05, Nov. 2018 (NCEI Accession 0288326) |
Abstract: | This dataset contains data collected on R/V Atlantis during cruise AT42-05 in the Gulf of California and North Pacific Ocean from 2018-11-17 to 2018-11-26. These data include depth. The instruments used to collect these data include Alvin Heatflow Probe 0.66m. These data were collected by Andreas Teske of University of North Carolina at Chapel Hill and Virginia P. Edgcomb of Woods Hole Oceanographic Institution as part of the "Collaborative Research: Hydrothermal Fungi in the Guaymas Basin Hydrocarbon Ecosystem (HOTFUN)" project. The Biological and Chemical Oceanography Data Management Office (BCO-DMO) submitted these data to NCEI on 2022-08-25. The following is the text of the dataset description provided by BCO-DMO: Temperature Profiles Dataset Description: Data are published in Ramírez et al., 2021 (Table 2), see related publications. |
Date received: | 20220825 |
Start date: | 20181117 |
End date: | 20181126 |
Seanames: | Gulf of California, North Pacific Ocean |
West boundary: | -111 |
East boundary: | -111 |
North boundary: | 27 |
South boundary: | 24 |
Observation types: | |
Instrument types: | |
Datatypes: | DEPTH - OBSERVATION |
Submitter: | |
Submitting institution: | Biological and Chemical Oceanography Data Management Office |
Collecting institutions: | University of North Carolina - Chapel Hill, Woods Hole Oceanographic Institution |
Contributing projects: | |
Platforms: | Atlantis (33AT) |
Number of observations: | |
Supplementary information: | Acquisition Description: Thermal profiles were measured in surficial sediments using Alvin’s 50 cm heat flow probe in Guaymas Basin, Gulf of California (111W 27N) in November 2018. Alvin dive numbers 4991-5001. A Heatflow probe manufactured by the Woods Hole Oceanographic Institution (WHOI) was used to measure temperature profiles. This is a 0.6 m titanium tube containing a linear heater and five thermistors (type 44032, Omega Engineering, Inc.) at 10 cm intervals along the length of the tube (personal communication with Lane J. Abrams, WHOI). The thermistors have a tolerance of +/- 0.2 up to 40C, and +/- 1 C up to 200C. The probe has thermal sensors every 10 cm, starting 5 cm under the attached plastic disk (the “puck”) that limits probe penetration and rests on the seafloor once the probe is inserted. After approx. 3 to 5 minutes, temperature readings stabilize and are recorded. The heat flow probe shorted at the beginning of Alvin dive 5000; instead, the thermosensor within the tip of the suction intake was inserted into the sediment at approx. 5 cm, 10 cm and 20 cm depth, and the temperature was recorded immediately. The probe is considered fully inserted when a disk at the base reaches the sediment surface, and takes temperature readings at 0, 10, 20, 30 and 40 cmbsf. For additional resolution, 5 cm depth resolution was achieved by first inserting the probe 5 cm less than complete insertion and recording one profile, and then inserting the probe the rest of the way and recording a second profile, 5 cm offset from the first. Temperatures were recorded after the readings had stabilized for each of the five depths, usually after 3 to 5 minutes. |
Availability date: | |
Metadata version: | 1 |
Keydate: | 2024-02-02 15:28:53+00 |
Editdate: | 2024-02-02 15:29:57+00 |