subroutine data (is, ie, js, je)

!----------------------------------------------------------------------
!     data routine
!----------------------------------------------------------------------

      implicit none

      integer ie, is, je, js, i, iou, j, m, n

      real damp1, damp2, realdays, wnext
      real c10, c100, p001, p035

      include "size.h"
      include "param.h"
      include "pconst.h"
      include "stdunits.h"
      include "csbc.h"
      include "ctdbc.h"
      include "tmngr.h"
      include "switch.h"
      include "scalar.h"
#if defined O_embm
      include "atm.h"
#endif

      c10 = 10.
      c100 = 100.
      p001 = 0.001
      p035 = 0.035

!-----------------------------------------------------------------------
!     determine the disk pointers, time weight interpolation factor,
!     and whether or not it is time to bring in new S.B.C. from disk
!     based on the time (days) in MOM since dec 31, 1899 midnight.

!     express model time in days after start of S.B.C. by adding time
!     of I.C. to current model time then subtract time at start of
!     S.B.C.. Note that "itemptime" was allocated in settmngr and is
!     only needed as a temporary.
!     need to add "dt" to the model time because the call to
!     data precedes the time stepping loop which calls mom, so the
!     model time has not yet been incremented when data executes.
!-----------------------------------------------------------------------

      do n=1,ntdbc
        call addtime (initial, imodeltime, itemptime)
        call addtime (itemptime, idt, itemptime)
        call subtime (itemptime, isbcstart(n), itemptime)
        daysbc(n) = realdays(itemptime)
      enddo

!-----------------------------------------------------------------------
!     determine the disk pointers, time weight interpolation factor,
!     and whether or not it is time to bring in new S.B.C. from disk
!     based on the time (days) in MOM since dec 31, 1899 midnight.
!-----------------------------------------------------------------------

      do n=1,ntdbc
        call timeinterp (daysbc(n), n, tdrec(1,n), aprec(1,n)
     &,    ntdrec(n), period(n), method, inextd(n), iprevd(n)
     &,    wprev(n), rdtdbc(n), inextm(n), iprevm(n))
#if defined O_sbc_in_memory
        rdtdbc(n) = .false.
        iprevm(n) = iprevd(n)
        inextm(n) = inextd(n)
#endif
      enddo

!-----------------------------------------------------------------------
!     read in data for each S.B.C. when necessary
!-----------------------------------------------------------------------

      n = 1
      do m=1,numsbc

        if ( m .eq. itaux ) then
!         x component of windstress
          call get_tdsbc (n, 'O_tau.nc', 'O_tauX', itaux
     &,     rdtdbc(n), c10, c0)

        elseif ( m .eq. itauy ) then
!         y component of windstress
          call get_tdsbc (n, 'O_tau.nc', 'O_tauY', itauy
     &,     rdtdbc(n), c10, c0)

        elseif ( m .eq. iws ) then
!         surface wind speed
          call get_tdsbc (n, 'A_windsur.nc', 'A_windspd', iws
     &,     rdtdbc(n), c100, c0)

        elseif ( m .eq. iaca ) then
!         atmospheric coalbedo
          call get_tdsbc (n, 'A_calbatm.nc', 'A_calbatm', iaca
     &,     rdtdbc(n), c1, c0)

#if defined O_npzd_iron
        elseif ( m .eq. idfeadep ) then
!         read atmospheric fe deposition
          call get_tdsbc (n, 'O_feflux.nc', 'O_feflux', idfeadep
     &,     rdtdbc(n), c1, c0)

#endif

#if defined O_read_my_stf
        elseif ( m .eq. ihflx ) then
!         heat flux
          call get_tdsbc (n, 'F_heat.nc', 'F_heat', ihflx
     &,     rdtdbc(n), c1, c0)

          elseif ( m .eq. isflx ) then
!         fresh water flux
          call get_tdsbc (n, 'F_salt.nc', 'F_salt', isflx
     &,     rdtdbc(n), c1, c0)

#elif defined O_replacst
        elseif ( m .eq. isst ) then
!         replace sst and let model calculate fluxes
          call get_tdsbc (n, 'O_tempsur.nc', 'O_tempsur', isst
     &,     rdtdbc(n), c1, c0)

        elseif ( m .eq. isss ) then
!         replace sss and let model calculate fluxes
          call get_tdsbc (n, 'O_salsur.nc', 'O_salsur', isss
     &,     rdtdbc(n), p001, -p035)

#elif defined O_restorst
        elseif ( m .eq. ihflx ) then
!         set fluxes for restoring sst
          call get_tdsbc (n, 'O_tempsur.nc', 'O_tempsur', ihflx
     &,     rdtdbc(n), c1, c0)

        elseif ( m .eq. isflx ) then
!         set fluxes for restoring sss
          call get_tdsbc (n, 'O_salsur.nc', 'O_salsur', isflx
     &,     rdtdbc(n), p001, -p035)

          damp1 = dampdz(1)*secday/dampts(1)
          damp2 = dampdz(2)*secday/dampts(2)
          do j=1,jmt
            do i=1,imt
              sbc(i,j,ihflx) =  damp1*(sbc(i,j,ihflx) - sbc(i,j,isst))
              sbc(i,j,isflx) = damp2*(sbc(i,j,isflx) - sbc(i,j,isss))
# if defined O_save_flxadj && defined O_embm
              flxadj(i,j,1) = sbc(i,j,ihflx)
              flxadj(i,j,2) = sbc(i,j,isflx)
# endif
            enddo
          enddo

#endif
#if defined O_embm_awind &&  defined O_embm
        elseif ( m .eq. iwa ) then
!         surface wind angle
          call get_tdsbc (n, 'A_windsur.nc', 'A_windang', iwa
     &,     rdtdbc(n), c1, c0)

#endif
#if defined O_embm
        elseif ( m .eq. iwxq ) then
!         x component of advecting wind
          call get_tdsbc (n, 'A_wind.nc', 'A_windqX', iwxq
     &,     rdtdbc(n), c100, c0)

        elseif ( m .eq. iwyq ) then
!         y component of advecting wind
          call get_tdsbc (n, 'A_wind.nc', 'A_windqY', iwyq
     &,     rdtdbc(n), c100, c0)

        elseif ( m .eq. iwxt ) then
!         x component of advecting wind
          call get_tdsbc (n, 'A_wind.nc', 'A_windtX', iwxt
     &,     rdtdbc(n), c100, c0)

        elseif ( m .eq. iwyt ) then
!         y component of advecting wind
          call get_tdsbc (n, 'A_wind.nc', 'A_windtY', iwyt
     &,     rdtdbc(n), c100, c0)

# if defined O_carbon_co2_2d
        elseif ( m .eq. iwxc ) then
!         x component of advecting wind
          call get_tdsbc (n, 'A_wind.nc', 'A_windcX', iwxc
     &,     rdtdbc(n), c100, c0)

        elseif ( m .eq. iwyc ) then
!         y component of advecting wind
          call get_tdsbc (n, 'A_wind.nc', 'A_windcY', iwyc
     &,     rdtdbc(n), c100, c0)

# endif
#endif
#if defined O_shortwave
        elseif ( m .eq. ipsw ) then
!         penetrating shortwave radiation
          call get_tdsbc (n, 'O_penswr.nc', 'O_penswr', ipsw
     &,     rdtdbc(n), c1, c0)

#endif
#if defined O_mtlm
        elseif ( m .eq. idtr ) then
!         diurnal temperature range
          call get_tdsbc (n, 'L_diurtemp.nc', 'L_diurtemp', idtr
     &,     rdtdbc(n), c1, c0)

#endif
        endif

      enddo

      return
      end

      subroutine get_tdsbc (n, file, name, index, read, scalar, offset)

      implicit none

      character (*) :: file, name
      character (120) :: fname, new_file_name, text

      integer i, index, iou, j, n, ib(10), ic(10)

      logical read, exists

      real offset, scalar, wnext, C2K

      include "size.h"
      include "param.h"
      include "pconst.h"
      include "stdunits.h"
      include "csbc.h"
      include "ctdbc.h"

      logical inqvardef

      real tmpij(imtm2,jmtm2)

      C2K = 273.15
      if (read) then
        fname = new_file_name (file)
        inquire (file=trim(fname), exist=exists)
        if (.not. exists) then
          print*, "Error => ", trim(fname), " does not exist."
          stop 'get_tdsbc in data.f'
        endif
        obc(:,:,n,inextm(n)) = c0
        ib(:) = 1
        ic(:) = 1
        ib(3) = inextd(n)
        ic(1) = imtm2
        ic(2) = jmtm2
        call openfile (fname, iou)
        if (inqvardef(name, iou)) then
          call getvara (name, iou, imtm2*jmtm2, ib, ic, tmpij
     &,     scalar, offset)
          obc(2:imtm1,2:jmtm1,n,inextm(n)) = tmpij(1:imtm2,1:jmtm2)
          call embmbc (obc(:,:,n,inextm(n)))
          text = "C"
          call getatttext (iou, name, 'units', text)
          if (name .ne. "L_diurtemp".and. trim(text) .eq. "K")
     &      obc(:,:,n,inextm(n)) = obc(:,:,n,inextm(n)) - C2K
          where (obc(:,:,n,inextm(n)).gt.1.e30) obc(:,:,n,inextm(n))=0.
        endif
      endif
      wnext = c1-wprev(n)
      do j=1,jmt
        do i=1,imt
          sbc(i,j,index) = wprev(n)*obc(i,j,n,iprevm(n))
     &                   + wnext*obc(i,j,n,inextm(n))
        enddo
      enddo
      n = n + 1

      return
      end